Of the fabricating characteristics of stainless steel and milling cutter choose
2024-04-14
How has been milling cutter ground know? Almost err
2024-04-14
Cutting tool of carpentry engrave mill operates a note
Of engrave mill cutting tool choose | The person that cutting tool of tide engrave mill is used for major designs different cutting tool according to different use material, main component is 5 kinds big: Particieboard, medium fine board, real wood, Yakeli, with man-made stone, the person that major is used needs the material with different according to to choose different cutting tool, in order to reach the optimal effect of cutting and durable level. |
Of the machine choose | All cutting tool are in make during finishing, all detect through the balance, assure the misgive that jumps without diameter, swing to ensure cutting tool in use to not have again and beat, notice to choose machine equipment and admirable chuck please. |
Of chuck choose | Chuck must choose appropriate measure, if discover,be tatty circumstance, can bring about chuck cannot normal and correct clamp cutting tool, change instantly please the chuck that has standard norms, avoid cutting tool to rotate in high speed under generation petiole shakes, fly or the hazardous condition of twist off. |
The installation of tool authority | Cutting tool petiole should set according to the European Union, for example the clip of 12.7MM handle diameter holds deepness to must achieve 24MM, bear in order to maintain the pressure with due knife handle limits. |
The set of rotate speed | The cutting tool with bigger external diameter should be installed according to the following revolution counter, slow advance, carry even feed rate, driving action do not suspend in cutting process. |
Diameter | Top rotate speed |
1''(25MM) 24, 000 RPM | |
1-1/4'' - 2''(30-50MM) 18, 000 RPM | |
2-1/4''-2-1/2''(55-65MM) 16, 000 RPM | |
3''-3-1/2''(75-900MM) 12, 000 RPM | |
Change immediately prop | When cutting tool blunt, change please new cutting tool, do not continue to use, lest produce cutting tool,rupture and inductrial injury is accident. |
The choice of edge length | Edge length is chosen to be more than working thing please when use cutting tool, for example desire mill the groove of 12.7 deepness, choose the cutting tool of 25.4MM edge length please, avoid to use 12.7MM or the cutting tool under 12.7MM. |
Safe operation | When the operation is machined, the person that use please deserves to wear safe glasses, safety is pushed, on use desk model also need to use when machine equipment prevent rebound device, avoid working thing to be in high speed cutting |
Copyright statement: Originate as a result of partial article network, additionally some articles are pushed when sending, fail to get in touch in time with former writer. If involve above copyright issue, former writer contacts us to delete or handle please.
Forum of carpentry cutting tool"Zjwoodtools " [small signal]
Net of carpentry cutting tool (Http://www.zjwoodtools.cn) - website of carpentry tool industry, major of lumber cutting processing technique communicates forum. This station is dedicated all sorts of pertinent information and technical issue talk trade of carpentry saber saw, release the vermicelli made from bean starch that pays close attention to this platform freely to read, daily content of newer plan article; The member that offer carpentry tool industry to my wife communicates the harmonious platform that discuss, satisfy requirement of industry of the person that visit.
Carry on | Cutting tool advertisement | Flexible language is popularized | Invite applications for a job of to apply for a job | Small letter is pushed send
QQ of business affairs collaboration: 157561175
Below ▼ dot " read textual " enter community to participate in a comment to interact
